1800℃ 튜브 전기로(300mm) SH-FU-120TS

1800℃ 튜브 전기로(300mm) SH-FU-120TS

 

1800℃ 튜브 전기로(300mm) SH-FU-120TS

 

모델	SH-FU-120TS
상품간략설명	Gas 분위기 사용 전기로 , 1650℃ 이하 온도사용시 최적의 제품 , Over temp alarm 기능장착 , 전기 안정성 확보(C.E 인증품)

 

1800°C Gas Flow Package

Model	SH-FU-120TS-WG
Furnace	SH-FU-120TS
Components	Gas Flowmeter 1EA
	Stainless Steel Pipe & Connector
	Gas Sealing Mask
	Alumina Tube (Length 1000 mm)
Cat. No.	FU120TS-18WG230

 

• Safety Device

• -Automatic reset function incoming power cut
• -Over temperature alarm

• Option

• -Gas inlet module 추가
• -MFC, BPR

1800°C Tube Furnace

​

• 가스 분위기 사용에 용이한 제품
• 로 분위기 온도 1650℃ 이하 사용시 주로 사용되는 제품
• Heat Element 교체가 용이하도록 설계

 

Model	SH-FU-120TS
Max Temp	1800℃ (3272℉)
Temp Controller	Programmable Controller(SP590)
Sensor	B type
Applicable Tube Diameter	120 Φ
Heater Capa	5.4 KW
Dimension Hot Zone	Length 300 mm
Dimension External (W×D×H )	690x640x1110mm 27.17x25.20x43.70''
Weight	160 Kg
Heater Element	MoSi 2
Insulation	Ceramic Board & Wool
Electrical Requirements 230V ,50/60Hz, 1Φ	23.5 A
Cat. No. 50Hz(60Hz)	FU120TS230-18

 

Mass Flow Controller(Multi gas selectable)

• Accessible PID valve tuning for best speed and stability.
• Custom valve orifice sizes: yields full-range stability.
• Control mass flow, vol. flow or pressure with one device.
• No warm-up: ready to control process flows in one second.

 

Model	MC Series	MCS Series	MCSS Series	MCV Series
Type	General	For Toxi Gas	For Toxi Gas (Cl2, SO2, HCl 포함)	For Vacuum
Flow Range	0 ~ 1 slpm / 0 ~ 5 slpm
Mass Flow Accuracy at calibration conditions	±0.6% of reading or ±0.1% of full scale	±0.8% of reading or ±0.2% of full scale
Operating Temperature Range	-10 to +60°C
Temperature Accuracy	±0.75°C
Operating Pressure full scale	145 PSIG
Pressure Accuracy	Above 1 atm: ±0.5% of reading
Typical Indication Response Time	< 10 ms	< 100 ms
Typical Warm-Up Time	<1 Second
Monochrome LCD	Simultaneously displays mass Flow, pressure and temperature	Simultaneously displays mass Flow, Volumetric Flow, pressure and temperature
Mechanical Dimensions (HxWxD)	104.14x91.44x27.94mm / 4.1x3.6x1.1"			121.92x172.72x38.1mm /4.8x6.8x1.5"
Gas Selectable	98 Gas	128 Gas (Cl2, SO2, HCl 제외)	131 Gas (Cl2, SO2, HCl 포함)	98 Gas
Communication	RS-232

 

Gas Select™ Preloaded Gases

Mass Flow Controller(Multi gas selectable)

​

• Accessible PID valve tuning for best speed and stability.
• Custom valve orifice sizes: yields full-range stability.
• Control mass flow, vol. flow or pressure with one device.
• No warm-up: ready to control process flows in one second.

Model	BPR Series	BPRV Series	BPRS Series	BPRSS Series
Type	General	For Vacuum(음압용)	For Toxi Gas (CL2, HCl, SO2 제외)	For Toxi Gas (CL2, HCl, SO2 포함)
Pressure Range	1PSIG ~ 15PSIG	0PSIG ~ 1PSIG(0 ~ 760torr)	1PSIG ~ 15PSIG
Standard Accuracy	± 0.25% (≥ 1 psi)
Repeatability	± 0.08% Full Scale
Typical Response Time	< 100 ms
Warm-up Time	< 1 Second
Operating Temperature	-10 to +60℃
Monochrome LCD	Displays Pressure
Mechanical Dimensions (HxWxD)	104.14x91.4x27.94mm / 4.1x3.6x1.1"
Communication	RS-232

 

Programmable Controller

​

• 고정도(0.1%), 고기능 실현
• 멀티 입력(T/C, RTD, DCV) 지원
• 멀티 출력 및 동시 출력(Max 5점) 가능
• 파라메타 조작 용이 및 설정값 문자화
• 오버 슈트 억제 기능 지원
• 외부 접점 입력에 의한 RUN/STOP 가능
• 보조 출력 상태의 운전화면 표시
• 2패턴에 총 30 세그먼트 가능
• 다양한 보조출력지원(IS, TS, PEND 등)
• 구간별 입력 보정기능(Max 4 Zone)
• PID 자동 보정 기능(AT Gain) 탑재
• 다양한 통신 프로토콜 지원(Modbus 외)
• 고품질, 고신뢰성(CE,CUL,ISO 등) 실현

Display	Size(WxHxL)	96x96x68mm(3.8x3.8x2.68'') / 72x72x68mm(2.83x2.83x2.68'')
	PV/SP Display	4 Digit
Operation Mode		Program / Reset, 2 Zone PID
Control Mode		1CH Control
Max Channel		-
Pattern & Segments		2 Pattern / Max 30 segments
Input	TC	K, J, E, T, R, B, S, L, N, U, W, C, Platinel Ⅱ
	RTD	Pt100Ω, JPt100Ω
	Analog Voltage Input	-10~20mV, 0~100mV, 0.4~2.0V DC, 1~5V DC, 0~10V DC
Output	Control Output	RELAY, SSR(Voltage Pulse)
	Current Output	4 ~ 20mA DC
	Voltage Output	-
	Transmission Output	4 ~ 20mA (PV, SP, MV)
Digital Input	Contact Type	2 Points / 4 Types(RUN, HOLD, STEP, RESET)
	Contact capacity	-
Digital Output	Relay	Normal Open 30V DC A, 250V AC 1A Normal Close 30V DC3A 250V AC 3A
	Open Collector	ON voltage across contacts at less than 2V, the leakage current less than 100㎂
Sampling Time		250ms
Accuracy		±0.1% ±1% digit of Full Scale
Event	Alarm	1 Point / Max 3 Points(20 Types)
	Inner Signal	2 Points (PV, SP, TSP)
	Time Signal	1 Point
	Other	1 Point (RUN, Pattern END, UP, DOWN, SOAK)
Communication	Interface	RS485
	Protocol	PC-Link, MODBUS(ASCII, RTU), SYNC(Master, Slave)
	Speed	Max 115,200 bps
Power	Power	100 ~ 240V AC, 50 ~ 60Hz
	Power Consumption	Max 10W
Operating environment		-
Weight		-

 

적용분야

• 우주소재 및 금속재료 생산 산업분야/세라믹, 합금, 타타늄의 열처리를 수행하는 파괴시험 연구, 개발 및 생산
• Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
• 니켈함금과 같은 금속류 분말을 소결하는 연구, 개발 및 생산
• Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.
• 고분자합성물과 그라핀을 개발하는 재료공학 연구, 개발 및 생산
• Material technology providers who develop polymer composites and graphene materials.
• 가스분위기에서 상온과 고온(1700도)의 반복산화시험을 수행하는 우주항공용 소재 연구,개발 및 생산
• Aerospace companies who perform cyclic oxidation test between high tmep to room temperature in atmosphere-controlled environment.
• 재료의 연소를 통해 성분을 분석해야 하는 의료 연구, 개발
• Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
• 진공과 가스분위기에서 소결을 해야 하는 재료 혁신 연구, 개발 및 생산
• Material innovation companies who do sintering in vacuum or in inert gases.
• 인코넬 718 튜브를 소결, 소둔, 경화하는 진공전기로가 필요한 해상용 표면 인젝션 시스템 연구, 개발및 생산
• Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
• 다양한 물질을 열처리시험을 통해 분석하는 연구, 개발
• Analytical research labs who perform various material testing with thermal treatment.
• 합금파우더를 소둔하는 의료용 임플란트 연구, 개발및 생산
• Medical implants manufacturers who anneal alloy powders.
• 고분자세라믹부품의 소결을 하는 대학교 재료 과학 연구,개발
• Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
• 고체산화연료전지를 가공하는 응용과학기술 분야
• Applied science engineers who process solid oxide fuel cells (SOFC).
• 연소물질이 필요한 환경 화학 연구 분양
• Environmental and chemical researchers who need combustion of materials.
• 위험물질관리, 오염토양복원, 공기오염관리 분야
• Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
• 금속 진공남땜이 필요한 금속부품 생산 분양
• Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
• ASTM D2584에 따라 섬유강화합성물의 유리성분을 시험해야 하는 수질처리 분야
• Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
• 질화갈륨 반도체 웨이퍼를 소둔하는 반도체 분야
• Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
• 다공세라믹튜브을 위한 양생과 소결방법을 연구하는 엔지니어링 분양
• Engineering companies who do curing and sintering solutions in porous ceramic tubes.
• 토양연소가 필요한 토목공학 분야
• Civil engineers who need soil combustion.
• 진공조건에서 실리카 웨이퍼를 소둔하는 연구 분야
• University labs who anneal Si wafer in vacuum condition.
• 탄소나노섬유(CNT) 전구의 열처리를 수행하는 화학연구분야
• Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
• 해상용 중유의 성분을 분석하는 해상장비제조분양
• Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
• 화학증기증착기법(CVD) 을 이용한 그라핀기반재료를 생산하는 그라핀 연구, 개발 및 생산
• Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace
• 폴리머, 옥사이드, 인산염, 황화물을 이용한 차세대 고체전지 개발분양
• Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.

 

---

구매하러 가기▼

https://smartstore.naver.com/vls0711/products/7612641635

1800℃ 튜브 전기로 : 비전랩사이언스

 

---

문의 사항은 아래 연락처로 문의바랍니다.

전화문의 032-861-0282
팩스번호 032-861-0283
메일 vls0711@hanmail.net